DS200
200 A Current Transducer
Product description
200 A Current Transducer
200A rms - 300A peak
Turns ratio 1:500
Apperture size is 27.6mm
Specified ambient temperature from -40 to +85 °C
Available with LEMO, BNC and DSUB output connection
DS600
600 A Current Transducer
Product description
600 A Current Transducer
600A rms - 1200A peak
Maximum gain error DC to 2kHz - 0.01%
Specified ambient temperature from -40 to +85 °C
Turns ratio 1:1500
Apperture size is 27.6mm
Available with LEMO, BNC and DSUB output connection
DS2000
2000 A Current Transducer
Product description
2000 A Current Transducer
2000 A rms - 3000 A peak
Maximum gain error DC to 500Hz - 0.01%
Turns ratio 1:1500
Apperture size is 68 mm
Specified ambient temperature from -40 to +85 °C
Danisense advanced sensor protection circuit “ASPC"
Available with LEMO, BNC and DSUB output connection
DSSIU-4
Power Supply
Product description
Plug and play system solution
Drives up to 4xDS2000 transducers
Different cable lengths are available as accessories
Signal Output cable
Product description
2m (6ft) long signal output cable
Easy termination into analyzer or multimeter
Power supply cable
Product description
5m (15ft) long power supply cable
5m (15ft) long power supply cable
Simple to use
Easy to extend with standard cables
Build to be used with std laboratory DC power supply
DS600 Current Analysis Kit
Product description
Bundle for current measurements which consists of following Danisense components:
DS600
2 m signal output cable
5 m power supply cable
PCT
Precision current transducer
Product description(產(chǎn)品描述)
Precision current transducer with built-in electronics
Max. Accuracy 0.01%
Temperature range -40°C - + 85°C
Power supply Internally from LMG95/LMG450/LMG500/LMG670
Versions:
PCT200 Precision current transducer, max 200Arms (300A peak), Ratio 500:1, Range DC - 1 MHz
PCT600 Precision current transducer, max 600Arms (900A peak), Ratio 1500:1, Range DC - 100 kHz
Standard Accessories:
PCTxxx-K-L50 1 pc. 2.5m connecting cable
Optional Accessories:
L50-Z14 Adapter for LMG500 to connect sensors and current clamps terminating with HD15-plug
PSU
Precision Current Transducer series 0.1A bis 25,000A
Product description(replaced by PCT Series)
Expanding precision power measuring ranges of ZES ZIMMER? LMG series
Features:
Feed Through Current Transducer adapted to expand precision power measuring ranges of ZES ZIMMER? LMG series
Precise measurement of low and high currents 0.1 A up to 25,000 A
High dynamic ranges through excellent linearity and very low temperature coefficient (0.5ppm/°C)
Zero flux transducer with extremely stable zero point, lowest noise and high bandwidth DC to 1MHz