QYXT-250S蛇形脂肪抽出器價格
【簡單介紹】
上海小型實驗室噴霧干燥機、干式氮吹儀、水浴氮吹儀、固相萃取裝置、干式恒溫器、索氏提取器、蛇形脂肪抽出器生產廠家,誠招全國經銷代理!
產品報價:
【詳細說明】
蛇形脂肪抽出器產品介紹:
索氏提取器是由提取瓶、提取管、冷凝器三部分組成的,提取管兩側分別有虹吸管和連接管,各部分連接處要嚴密不能漏氣。從固體物質中萃取化合物的一種方法是,用溶劑將固體*浸潤而將所需要的物質浸出來,即*浸出法。此法花費時間長。溶劑用量大、效率不高。
Snake fat extractor product introduction:
Soxhlet extraction apparatus is made up of three parts of extraction, extraction pipe, condenser, extraction, respectively, on both sides have a siphon tube and connecting pipe, each part of the joint should not leak tight. Compounds extracted from solid material of a kind of method is to use solvent to solid long-term infiltration and will need material leaching out, namely long-term leaching method. It spend a long time. Solvent consumption big, the efficiency is not high.
蛇形脂肪抽出器主要特點:
脂肪提取器是利用溶劑回流及虹吸原理,使固體物質連續不斷地被純?nèi)軇┹腿?,既?jié)約溶利萃取效率又高。萃取前先將固體物質研碎,以增加固液接觸的面積。然后,將固體物質放在濾紙?zhí)變?nèi),置于提取器中,提取器的下端與盛有溶劑的圓底燒瓶相連,上面接回流冷凝管。加熱圓底燒瓶,使溶劑沸騰,蒸氣通過提取器的支管上升,被冷凝后滴入提取器中,溶劑和固體接觸進行萃取,當溶劑面超過虹吸管的zui高處時,含有萃取物的溶劑虹吸回?zé)?,因而萃取出一部分物質,使固體物質不斷為純的溶劑所萃取、將萃取出的物質富集在燒瓶中。液固萃取是利用溶劑對固體混合物中所需成分的溶解度大,對雜質的溶解度小來達到提取分離的目的。
Snake fat extractor key features:
Fat extractor is using the solvent backflow and siphon principle, make the solid material continuously by pure solvent extraction, saving solvent and extraction efficiency is high. Trituration of solid matter before extraction, in order to increase the area of the solid liquid contact.Then the solid material, in filter paper set inside, put in extractor, the lower end of the extractor and round bottom flask containing solvents are linked together, the above answer the reflux condenser pipe. Heating round bottom flask, the solvent boiling, steam by rising branch pipe extractor, after condensation drops into the extractor solvent for extraction, and solid contact when solvent side more than the highest point of siphon, contains extract solvent siphoned back into the flask, and extract the part of the material, the solid material continuously to pure by solvent extraction, to extract the substance concentration in a flask. Liquid-solid extraction is the use of solvent mixture of solid solubility of the ingredients in big, less solubility of the impurity to achieve the purpose of the extraction and separation.
蛇形脂肪抽出器技術參數:
型號 | 部件名稱 | 規 格 | 數量 |
QYXT-150S | 索氏提取器 | 蛇形冷凝管,提取管,提取瓶150ml | 各1 |
電加熱保溫套 | 150ml(可選水浴) | 1個 | |
鐵架臺(帶不銹鋼桿) | 中號 | 1個 | |
*夾/燒瓶夾 | 中號 | 2個 | |
十字夾 | 大號 | 2個 | |
QYXT-250S | 索氏提取器 | 蛇形冷凝管,提取管,提取瓶250ml | 各1 |
電加熱保溫套 | 250ml(可選水?。?/span> | 1個 | |
鐵架臺(帶不銹鋼桿) | 中號 | 1個 | |
*夾/燒瓶夾 | 中號 | 2個 | |
十字夾 | 大號 | 2個 | |
QYXT-500S | 索氏提取器 | 蛇形冷凝管,提取管,提取瓶500ml | 各1 |
電加熱保溫套 | 500ml(可選水?。?/span> | 1個 | |
鐵架臺(帶不銹鋼桿) | 中號 | 1個 | |
*夾/燒瓶夾 | 中號 | 2個 | |
十字夾 | 大號 | 2個 |
蛇形脂肪抽出器 產品報價:
請輸入產品關鍵字:
郵編:201615
聯系人:楊敏華
留言:在線留言
商鋪:http://sixdu.net/st41169/