日韩一区二区三区精品视频第三页,日韩精品免费一区三区,日韩精品免费一区三区

CEDAR數顯扭力起子DSD-4M

產品特點

Compact lightweight one apparatus...
The Final edition of management of bolting torque.

Screw tightening control
DSD-4

● DIGITAL TORQUE DRIVER DSD-4M

CEDAR數顯扭力起子DSD-4M

(1) Automatic screw turning with Ratchet mechanism without changing the grip.

(2)Preinstall "Real-time Output Mode" Which Outputs Load Torque Every [ about 1 / 70] Seconds. A graph can be written with a personal computer.

(3)Display, Preservation, and Output about Maximum, Minimum, and Average of Measured Value.

*The torque screwdriver is Ergonomic and light weight, yet ruggedly constructed
*Available in: lb-in, kg-cm and N-m (specify units when ordering)
*Peak, Real Time and Peak Down measuring mode (selectable)
*300 data memory for recall or for SPC download
*Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
*Programmable screw tightening counter
*Programmable Auto Zero function resets unit to zero for easy operation
*Both CW and CCW operation
*RS-232 output for SPC capability
*Runs on internal NiCad batteries (for 8 hours) Auto shut-off after 10 min. of non-use
*Step less one-way clutch adapter (1/4" female hex), AC charger and carrying case included.

性能參數

尺寸圖

相關附件

Specification		DSD-4M
Measuring range (at the time of Track)		0.030 - 4 N-m
		0.30～40 kgf-cm
		0.30～35 lbf-in
		*A measurement unit is fixed to one unit. Specify units when ordering
Accuracy		± 0.5% (in case of reading 499 or less = last digit +/- 3 reading)
Measuring unit		lbf?in-kgf?cm-N?m
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (right and left)
Measuring mode	P-P Peak	Holding Peak Load Value
	T-R Track	Showing Real time torque value ( Used for Zero-Adjustment )
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 70 second by RS232C.
Decision function	Setting of torque value	Programmable High and Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum, and the average value		Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	Serial interface RS232C (Baud rate : 9600)
	Data memory	300 data / ten channels data
A setup of the number of counts		One to 99 count (count in a direction with a bundle)
Power supply		Ni-Cd chargeable battery 1.2V×4cells 600mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 5hours
Continues working time		12 hours
Bit fit mouth		HEX6.35
Weight		330g
Attachment		Bit （＋）?。＃薄。＃?
Accessories (one piece each)		Dedicated AC/DC Adaptor (Charger), 230VAC or 120VAC- DC 7.5V 120mA Output
		An inspection report, a proofreading certificate, a traceability system figure