中文字幕一区二区中文,欧美日韩一区二区激情,欧美午夜精品福利一区二区三区

CEDAR數顯扭力測試儀

產品特點

Management of a torque driver wrench.
The best for everyday check of bolting tool of a screw.

Measurement of torque driver / torque wrench

● TORQUE TESTER 　DI-3M-IP series

Management of various torque wrench torque drivers

NEW FUNCTIONS
(1) Preinstall "Real-time Output Mode" Which Outputs Load Torque Every [ about 1 / 80] Seconds. A graph can be written with a personal computer.

(2)Display, Preservation, and Output about Maximum, Minimum, and Average of Measured Value.

Indicatort and Detector dissociate.
Easy to install to small space. Torque wrench(pre set type),Torque driver,etc.
It stands to inspection and management of a torque tool as a standard machine in the comoany at a role.

Abundant variations.
Since the model of series is abundant, the torque from low torque to high torque is managed by package. It is the optimal as a standard machine of management.

A Display screen became large. It is very legible
Even from the distant place, a numerical check is easy.

The main features
□It is a rechargeable battery drive, the installation to the spot is also easy.
□By the auto power OFF, It prevents forgetting to turn off the power.
□Personal-computer-manage data with a RS232C output.
□One-touch zero adjustment
□An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.
　　It is very convenient for a continuous check.
□The operation torque of a QL type and pre set type wrench driver can read 　measured value correctly in peak down mode (P-D).

性能參數

尺寸圖

相關附件

Specification		ＤＩ-3M-ＩＰ5	ＤＩ-3M-ＩＰ50	ＤＩ-3M-ＩＰ200	ＤＩ-3M-ＩＰ500
Measuring range (at time of Track)		0.030～5 N?m 0.30～50 kgf?cm 0.30～45 lbf?in	030～50 N?m 3.0～500 kgf?cm 3.0～450 lbf?in	3.01～200 N?m 30～2000 kgf?cm 30～1800 lbf?in	3.0～500 N?m 30～5000 kgf?cm 30～4500 lbf?in
Accuracy		±0.5% (499 or less digit±3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (right and left)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 80 second by RS232C.
Decision function	Setting of torque value	A Maximum and a minimum value are in a measuring range, and a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum, and the average value		Displays, memory and output the data number, the maximum, the minimum, and the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	Serial interface RS232C (Baud rate : 9600)
	Data memory	300 data
Power supply		Ni-Cd chargeable battery 1.2V×5cells 　700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continues working time		12 hours
Meter outside type dimension		102(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 357g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor (Please choose AC adaptor out of 120V, and 230V.)
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	ＩＰ５	ＩＰ５０	ＩＰ２００	ＩＰ５００
Ａ	Φ40	Φ50	Φ60	Φ80
Ｂ	41.2	63	73	99
Ｃ	5	10	10	15.5
Ｄ	Φ60	Φ90	Φ110	Φ140
Ｅ	Φ50	Φ74	Φ90	Φ116
Ｆ(Three division)	Φ4.2	Φ6.3	Φ8.3	Φ10.5
Ｇ　(Socket intuition affinity)	6.35ｓｑ	9.5ｓｑ	12.7ｓｑ	19ｓｑ
weight	189ｇ	632ｇ	1.8ｋｇ	3ｋｇ