經銷喜開理擺動夾緊氣缸,供應CKD擺動夾緊氣缸
??規格??
????所需夾緊力 ??500N
????使用壓力 ??0.5MPa
機種??旋轉夾緊氣缸 雙作用型
40 pressure area ?? 1055??mm2???? required pressure area ?? 1000??mm2??
3. Confirm that you are in the range of use shown in the joystick and the use pressure chart
?? Use pressure 0.5MPa Control lever length 80mm ?? Use range
根據使用一覽表的受壓面積??縮回側??選定氣缸尺寸
????40受壓面積??1055??mm2????所需受壓面積??1000??mm2??
雙導漕·帶滾柱
為提高導漕的耐磨性能，對全口
徑使用了雙導漕。另外還在導銷
上安裝了滾柱???? 32 ???? 50??。??
4. Make sure that you are within the range of the bar's inertia moment and the speed shown by the piston
?? lever inertia moment 2.0 ?? 10
??3kg / m?? Piston speed 100mm / s?? within the scope of use

經銷喜開理擺動夾緊氣缸,供應CKD擺動夾緊氣缸
開關型號 ??有接點T0H開關、導線長度1m
??開關數 ??前端帶1個
????活塞速度 ??100mm/s
????控制桿長度 ??80mm
????控制桿慣性力矩??2.0??10??3kg/m
??節省空間·矩形
可搭載全口徑開關
可搭載有接點·無接點·帶預防維
護輸出耐強磁場開關
Double guide with a roller
In order to improve the wear resistance of the guide, the whole mouth
Diameter using a double guide. Also in the guide
On the installation of the roller ???? 32 ???? 50 ??. ??
??安裝形式 ??基本型
??缸徑 ????20mm
??行程 ??21mm
??回轉方向 ??從前端看夾緊??拉??時，順時針方向回轉90度